MK9 Cigarette Making Machine With MAX-S Assembling Machine

This combination consists of three machines: MK9 cigarette maker, MAXS plug assembler and HCF80 tray filler. It can be customized to produce king size cigarettes, super slim cigarettes or kreteks with different size. The cigarette weight can be inspected and the bad cigarettes can be rejected online automatically. .

Highlights:

1. The cigarette cutting system uses the double-knife single-cutting system with lower-rise temperature and lower noise. This gives the very good quality of the cigarette cut.

2. The complete suction system and high air pressure system .

3. The hopper system adopts AC servo motor to directly drive the tobacco cutting system. The timing belts are used instead of the gears, so the even tobacco-feeding is greatly improved and the maintenance cost is reduced as well.

4. It adopts AC servo driving system that simplifies the mechanical structures and reduces the failure and maintenance cost, and improves the transmission precision.

5. Electric control system:

◆ control center: it adopts the SIEMENS PLC S7-300 series.

◆ weight controller: the microwave weight control system is adopted to avoid any harm to people.

◆ man-machine interface: The SIEMENS touch screen provides friendly man-machine interface, which displays the machine status and production data precisely. It is also convenient to modify the system parameter and check out the failure.

Parameters

Output	5000cig/min (Normal Size) 3500cig/min (super slim/Nano)
Frequency	50Hz
Total power	50KVA
Cigarette parameter	Outside dimensions
Filter-cigarette length	65 ~110± 0.5 mm
Cigarette maker	3630× 1270 × 1870mm
Tobacco rod length	55 ~90 mm
Plug assembler	3340×1340× 1820mm
Cigarette diameter	φ 5.4 ~φ 9.0 mm
Tray Filler	2350×2400× 2100mm
Power supply	380V ± 10%(3phases)
Total weight	8600kg

Making Process Requirements:

1. Ambient conditions
Temperature	20ºC--30ºC
Relative humidity	62%--68%
2. Paper bobbin
Tensile strength	≥0.85KN/m
Extensibility	>1.6%
Humidity	6%±1.5%
Joint number	<1/1000 m
3. Width	48±0.3 mm
Thickness	0.04mm~0.05 mm
4. Cut tobacco
Grade	A
Humidity	12.5%±0.5%
5. Compress air	5.5bar
6. Viscosity of VPA
For the maker	2500mPa.s-5000mPa.s
For the assembler	5000mPa.s-10000mPa.s